Shanghai Jianggong Valve Manufacturing Co., Ltd.
Shanghai Jianggong Valve Manufacturing Co., Ltd. Industrial valve expert With safe and reliable products To provide you with thoughtful services
Add to Cart
Highlight: Stainless steel CF8 flange gate valve
Product introduction:
The gate valve has two sealing surfaces, and the most commonly used mode is that the two sealing surfaces of the gate valve form a wedge shape. The wedge angle varies with the valve parameters. The gate plate of the wedge gate valve can be made into a whole, called a rigid gate plate; It can also be made into a gate that can produce slight deformation to improve its processability and compensate for the deviation of the sealing surface angle during the processing. This type of gate is called an elastic gate.
Product technical parameters:
| Nominal Diameter DN (mm) | 50~200 | |
| Nominal Pressure PN (MPa) | 1.6 | |
| Test Pressure (MPa) | Strength (water) | 2.4 |
|
| Enclose (Water) | 1.76 |
| Main Components | Body | WCB/CF8/CF8M |
|
| Valve ball | Stainless steel/Carbon steel |
|
| Seat | PTFE |
|
| Packing | Soft graphite |
|
| Shaft | 2Cr13 |
|
| Handle | Ductile iron |
| Working temperature | ≤150℃ | |
| Medium suitable | Water, oil, steam | |
Product features:
1. Simple shape, good manufacturing process, and wide applicability.
2. Low flow resistance, the medium channel inside the valve body is straight, and the medium flows in a straight line, resulting in low flow resistance.
3 When opening and closing, it is more labor-saving. Compared with globe valves, the direction of gate movement is perpendicular to the direction of medium flow, whether it is open or closed.
4. The medium can flow in any direction on both sides, making it easy to install. The two sides of the gate valve channel are symmetrical.
5. The flow direction of the medium is not restricted, does not disturb flow, and does not reduce pressure
Our Advantages:
