Shanghai Jianggong Valve Manufacturing Co., Ltd.
Shanghai Jianggong Valve Manufacturing Co., Ltd. Industrial valve expert With safe and reliable products To provide you with thoughtful services
Add to Cart
Cast Steel And Stainless Steel Flanged Free Ball Floating Steam Trap
Product introduction:
A steam trap, also known as an automatic drainer or condensate drainer, is divided into steam system use and gas system use. The steam trap is installed at the end of the steam heated pipeline, and its function is to continuously discharge the condensate water from the steam heated pipeline to the outside of the pipeline.
Most steam traps can automatically identify steam and water (excluding thermal static type), thereby achieving the goal of automatic steam blocking and drainage. Steam traps are widely used in industries such as petrochemicals, food and pharmaceuticals, and power plants, playing a significant role in energy conservation and emission reduction.
Free ball float steam trap is generally used in steam pipe network and equipment, can automatically discharge condensate, air and other non-condensing gas, and prevent steam leakage of the valve. This type of valve should generally be installed horizontally in the pipeline.
Free ball floating steam trap valve products use the principle of buoyancy, float according to the amount of condensed water changes with the water level and rise, automatically adjust the opening of the valve seat hole, continuous discharge of condensed water.When the condensate stops entering, the float drops to the bottom by its own weight and closes the drain seat hole.Because the drainage valve seat hole is below the condensate water level, the water vapor is separated naturally and the water seal is formed to achieve no steam leakage.
Product component and performance:
| Strength test | 1.5 times of pressure nominal | Valve body | WCB/HT/QT | ||
| Performance test | Air | 0.4～0.6Mpa | Bonnet | WCB/HT/QT | |
| Water | 0.4～0.6Mpa | Float ball | Stainless steel | ||
| TMO | 350℃ | Valve seat | Stainless steel | ||
| PMA | 0.5～4.0Mpa | Filter | Stainless steel | ||
| TMA | 280℃~540℃ | Shield | Special steel | ||
| LNT | ≈0℃ | Auto device | A105+ SS | ||
| MRBP | 90 % | Sealing | PPL/H62 | ||
| LLR | ≈0 | Bolt | 45/35CrMoA | ||
| Medium | Steam condensate | Nut | 45 | ||
Product Discharge capacity under different pressure:
| Port size | 15～25 | 32～50 | 65～80 | 100～125 | 125～150 |
|
Pressure Mpa |
B | D | F | G | G |
| Max discharge capacity (Kg/h) | |||||
| 0.5 | 550 | 1000 | 1900 | 2270 | 2730 |
| 0.6 | 410 | 850 | 1630 | 1800 | 2300 |
| 1.0 | 360 | 790 | 1300 | 1660 | 2120 |
| 1.6 | 350 | 740 | 900 | 1290 | 1990 |
Used in steam heating equipment, condensate recovery system and conditions requiring rapid condensate discharge, it can automatically, rapidly and continuously discharge condensate, effectively prevent steam leakage, and obtain the best heating effect.
1. Continuous discharge of saturated condensate heating equipment without water accumulation, thus obtaining the highest thermal efficiency.
2. The float ball can automatically adjust the opening of the valve seat hole, with continuous work and stable performance.
3. Good air exhaust performance, automatic exhaust device, no air lock phenomenon, smooth work without noise.
4. Automatic free floating ball trap is an automatic valve, especially for low pressure, low displacement and high temperature stability requirements, not with condensed water steam equipment is more suitable.
4. Automatic free floating ball trap can continuously drain water, stable performance, large displacement, small leakage.
5. It can drain continuous saturated water, so that the condensate storage is less, the heating temperature is fast and the heating temperature is stable
6. Automatic air exhaust device, no steam lock phenomenon, work balance and without noise.